Posts Tagged ‘Epoxy Grout’
JD Tile recently completed a laundry room tile renovation in Annville. The existing layers of vinyl were removed down to the plywood. Ditra uncoupling underlayment was installed to provide minimal height buildup. 18″ porcelain tiles with marble pattern were perfect to give the customer the durability of porcelain but the look of marble. Contrary to belief the washer and dryer do not move on the polished tiles. SpectraLock Epoxy grout was used which will provide the best stain resistance possible in grouts. This was the 5th floor in the home JD Tile has replaced floors.
This past Summer JD Tile completed a bathroom renovation in a farmhouse on the outskirts of Annville, to include a new tile shower and double sink vanity remodel. The existing shower was a fiberglass unit in the corner coming out about 3 ft. JD Tile suggested changing the footprint of the shower to make it bigger, frame and install 2 half walls to leave light in and have a niche on the inside of each half wall for a clean look. Subway tile was the choice of tile, traditional style for a farmhouse. Joints were installed tight at 1/16″. Granite was used for the curb top, half wall tops, and the new countertop for the double bowl vanity to replace the single. All the granite was fabricated by Lesher Marble and Granite. Shower glass by H2 of Lancaster. Double bowl vanity complete with subway tile splash. Customer chose to keep the wood floor vs tile. As always JD Tile used the best materials available to give the customer a high quality tile installation 100% waterproof shower.