JD Tile completed a steam shower in Lititz, PA. Steam showers are more common in commercial environments but with the advancement of products in the tile industry steam showers are becoming more common in the residential realm. A shower requires a moisture barrier so the water does not get beyond the shower into the walls. A steam shower requires a vapor barrier. For this steam shower we used the Hyrdro Ban sheet membrane to vapor proof the vertical surfaces and ceiling. The shower pan has a conventional liner with a 6″ drain, a customer request. Normally we use a standard 4″ drain. The Kohler steam unit in positioned behind the shower. For the opening to the shower it must be 100% sealed for maximum benefit for the steam to be contained. The glass door will encompass the entire opening. This shower had two vertical glass liners, two corner shelves, one wall to wall shelf and a pebble floor. The grout was Spectra Epoxy as we always use epoxy in our showers. Pebbles on the shower floor.