Quartz recycling project patio deck in Annville, PA. Using quartz remnants from a fabrication shop, these remnants were cut down into 12X16″ tiles, using first a grinder with a tubo blade and on the wet saw. Cutting them down is a slow process as quartz is a very dense material which makes it easy for cleaning and removing stains, much easier than granite. These remnants were picked up and cut down into a specific size versus being thrown into a landfill. 3″ mud bed was installed first, followed by the quartz tile installation. Thickness is same as countertops, 3 cm or 3/4″. The previously polished sides were roughed up using a special cup wheel for a good bond. The top of the quartz was roughed up using a grinder to have good traction for walking on, then the surface was enhanced to bring out the color and lastly sealed. Hydro Ban was put down on the surface of the mortar bed to protect the bed and the tiles were grouted with SpectraLock Epoxy grout since this an outdoor project. I have secured many more remnants quartz and granite so look for more unique tile/slab projects from JD Tile.